View SMP1352_1094285.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DATA SHEET
SMP1352 Series: Large Signal Switching, Plastic Packaged PIN Diodes
Features
Designed for large signal switches in base station and handset applications Available lead (Pb)-free and RoHS-compliant MSL-1 @ 260 C per JEDEC J-STD-020 Available in tape and reel packaging
Absolute Maximum Ratings Description
The SMP1352 series of plastic packaged, surface mountable, low-capacitance (0.3 pF) silicon PIN diodes is designed for large signal switch applications from 10 MHz to beyond 2 GHz. These diodes have a reverse voltage rating of 200 V and are designed for use in low-distortion switches that are required to hold off large RF voltages. The nominal 50 m I region width, combined with the typical 1.5 s carrier lifetime, results in a PIN diode with low forward resistance and low distortion characteristics.
Characteristic Reverse voltage (VR) Power dissipation @ 25C lead temperature (PD) Storage temperature (TST) Operating temperature (TOP) ESD human body model Value 200 V 250 mW -65 C to +150 C -65 C to +150 C Class 1C
NEW
Skyworks offers lead (Pb)-free, RoHS (Restriction of Hazardous Substances)-compliant packaging.
Performance is guaranteed only under the conditions listed in the specifications table and is not guaranteed under the full range(s) described by the Absolute Maximum specifications. Exceeding any of the absolute maximum/minimum specifications may result in permanent damage to the device and will void the warranty.
Single SOD-323 SMP1352-011 Marking: PR SMP1352-011LF Marking: RR LS = 1.5 nH
Single SC-79 SMP1352-079 SMP1352-079LF LS = 0.7 nH
CAUTION: Although this device is designed to be as robust as possible, ESD (Electrostatic Discharge) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions must be employed at all times.
LF denotes lead (Pb)-free, RoHS-compliant packaging option as an alternative to our standard tin/lead (Sn/Pb) packaging.
BUY NOW
Innovation to GoTM Select Linear Products (indicated by ) now available for purchase online.
Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com
200052 Rev. C * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice. * February 23, 2006
1
DATA SHEET * SMP1352 SERIES
Electrical Specifications at 25 C
Parameter Reverse current (IR) Capacitance (CT) Resistance (RS) Resistance (RS) Resistance (RS) Forward voltage (VF) Carrier lifetime (TI) I region width Condition VR = 200 V F = 1 MHz, V = 20 V F = 100 MHz, I = 1 mA F = 100 MHz, I = 10 mA F = 100 MHz, I = 100 mA IF = 10 mA IF = 10 mA 11 2 1 0.8 1 50 Typ. Max. 10 0.35 15 2.8 1.35 Unit A pF V s m
Typical Performance Data
1000 100
Series Resistance ()
Forward Current (mA)
100
10
10
1
1
0.1
0.1 0.01
0.1
1
10
100
0.01 400
500
600
700
800
900
1000
Forward Current (mA)
Forward Voltage (mV)
Series Resistance vs. Current @ 100 MHz
0.8 0.7 1 MHz 300
DC Characteristic
0V 250 10 V
Conductance (S)
0.6
Capacitance (pF)
200 40 V 150 100 50
0.5 0.4 0.3 0.2 0.1 0 0 1 2 5 10 20 50 100 100 MHz 1 GHz
0 0 500 1000 1500 2000
Reverse Voltage (V)
Frequency (MHz)
Capacitance vs. Reverse Voltage
Conductance vs. Frequency and Reverse Voltage
Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 2
April 22, 2005 * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice. * 200052 Rev. C
DATA SHEET * SMP1352 SERIES
Resistance vs. Temperature @ 100 MHz
IF (mA) 0.02 0.1 0.3 1 10 20 100 R -55 C () 260 60.9 22.4 7.9 1.5 1.1 0.55 R -15 C () 276 64 23.6 8.5 1.7 1.2 0.69 R 25 C () 302 70.6 26 9.2 1.9 1.3 0.78 R 65 C () 263 71 27.8 10.3 2.2 1.6 0.98 R 100 C () 240 70.1 28.2 10.7 2.3 1.7 1.03
SOD-323
0.090 (2.30 mm) Min. 0.108 (2.74 mm) Max. 0.010 (0.25 mm) Min. 0.016 (0.40 mm) Max. 0.063 (1.60 mm) Min. 0.071 (1.80 mm) Max.
0.045 (1.15 mm) Min. 0.053 (1.35 mm) Max.
1
2
Cathode Indicator 0.008 (0.20 mm) Nom. 0.006 (0.15 mm) Typ.
0.050 (1.25 mm) Max.
Recommended Solder Reflow Profiles
Refer to the "Recommended Solder Reflow Profile" Application Note.
0.010 (0.25 mm) Min.
0.004 (0.10 mm) Max.
SC-79 Tape and Reel Information
Refer to the "Discrete Devices and IC Switch/Attenuators Tape and Reel Package Orientation" Application Note.
0.010 (0.25 mm) Min. 0.014 (0.35 mm) Max. Cathode Indicator
1
0.006 (0.15 mm) Min. 0.028 (0.70 mm) Min. 0.035 (0.90 mm) Max.
2
0.060 (1.50 mm) Min. 0.067 (1.70 mm) Max. 0.043 (1.10 mm) Min. 0.051 (1.30 mm) Max. 0.020 (0.50 mm) Min. 0.028 (0.70 mm) Max. 10 Max.
10 Max. 0.003 (0.07 mm) Min. 0.008 (0.20 mm) Max.
Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com
200052 Rev. C * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice. * April 22, 2005
3
DATA SHEET * SMP1352 SERIES
Copyright (c) 2002, 2003, 2004, 2005, Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. ("Skyworks") products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks, the Skyworks symbol, "Breakthrough Simplicity" and "Innovation to Go" are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Thirdparty brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference.
Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 4
April 22, 2005 * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice. * 200052 Rev. C

▲Up To Search▲

Price & Availability of SMP1352

	To Download SMP1352 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .